Beverage pipes − DIN EN 10357

In March 2014, the new EN 10357 − Austenitic, austenitic-ferritic and ferritic longitudinally
welded stainless. This is revision of DIN 11850, which is now replaced by the publication of DIN EN 10357.

One of the main new aspects in the new standards is that the additional dimension lines are included, matching former European and international standards. With the series A - D, there are 4 different lines of dimensions.

  • Series A replaced DIN 11859 line 2
  • Series B replaced DIN 11859 line 1
  • Serie C complies with ISO dimensions
  • Serie D complies with OD and SMS Maßen

 

Dimensions

Series A Pipe outer diameter 13,0 19,0 23,0 29,0 35,0 41,0 53,0 70,0 85,0 104,0 129,0 154,0 204,0
Wall thickness 1,5 1,5 1,5 1,5 1,5 1,5 1,5 2,0 2,0 2,0 2,0 2,0 2,0
Series B Pipe outer diameter 12,0 18,0 22,0 28,0 34,0 40,0 52,0
Wall thickness 1,0 1,0 1,0 1,0 1,0 1,0 1,0
Series C Pipe outer diameter 17,2 21,3 26,9 33,7 42,4 48,3 60,3 76,1 88,9 114,3
Wall thickness 1,6 1,6 1,6 2,0 2,0 2,0 2,0 2,0 2,0 2,0
Series D Pipe outer diameter 25,0 25,4 32,0 38,0 38,1 38,1 50,8 50,8 51,0 63,5 63,5 76,1 76,1 76,1 101,6
Wall thickness 1,2 1,6 1,2 1,2 1,5 1,6 1,5 1,6 1,2 1,5 1,6 1,5 1,6 2,0 2,0

Version type, requirement and surface quality

Version type Heat treatment Surface quality and roughness Symbol
Inner surface Inner welding seam Outer surface and
welding seam area
Made of cold rolled steel Welded, seam smoothened Not heat treated Ra < 0,8 µm pickled and passivated Ra < 1,6 µm pickled and passivated pickled and passivated CC
Made of cold rolled steel Welded, seam smoothened heat treated Ra < 0,8 µm pickled and passivated or blank annealed Ra < 1,6 µm pickled and passivated or blank annealed pickled and passivated or blank annealed BC

Available materials 304/304L – 1.4301/1.4307
316L – 1.4404

Other materials upon inquiry
All pipes can be delivered with APZ 3.1 acc. to EN 10204, AD 2000-W2 upon inquiry.

Mail or call us:
+49 7454 96 80 0