2-way stainless steel flat body flnged stainless steel ball valve
M 352 FA
2-way stainless steel flat body flnged stainless steel ball valve
Full bore with DA pneumatic actuator
Dimensions / Dimensions | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Rp | F | ØP | A | B | C | D | E | G | ØM | ØN/* | ØR | H | |
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | Gas | mm | kg |
10 | DN 15 | 15 | 114 | 48 | 52 | 20 | 35 | 64 | 65 | M12/4 | 1/8" | 143,00 | 2,00 |
20 | DN 20 | 20 | 130 | 55 | 60 | 20 | 38 | 74 | 75 | M 12/4 | 1/8" | 154,00 | 2,40 |
25 | DN 25 | 25 | 130 | 55 | 60 | 20 | 42 | 83 | 85 | M 12/4 | 1/8" | 159,50 | 2,90 |
32 | DN 32 | 32 | 144 | 60 | 66 | 20 | 50 | 96 | 100 | M 16/4 | 1/8" | 172,00 | 4,10 |
40 | DN 40 | 40 | 152 | 65 | 70 | 20 | 60 | 105 | 110 | M 16/4 | 1/8" | 180,00 | 5,30 |
50 | DN 50 | 50 | 169 | 72 | 78 | 20 | 70 | 115 | 125 | M 16/4 | 1/8" | 195,00 | 7,40 |
Werkstoffe des Kugelhahns/Valve Materials | ||||
1 | Welle/Shaft | AISI 304 | 1.4301 | UNI X5CrNi 18 10 |
2 | Mutterbefestigungsscheibe/Nut shim | AISI 304 | 1.4301 | UNI X5CrNi 18 10 |
3 | Befestigungsmutter/Securing nut | AISI 304 | 1.4301 | UNI X5CrNi 18 10 |
4 | Federteller/Spring washer | 50 CrV4 | ||
5 | Distanzring/Spacer | AISI 304 | 1.4301 | UNI X5CrNi 18 10 |
6 | Stoffbuchse/Gland | AISI 304 | 1.4301 | UNI X5CrNi 18 10 |
7 | Obere Abdichtung/Upper seal | P.T.F.E. | ||
8 | O-Ring für mittlere Abdichtung/ O-ring for central viton seal |
Viton | ||
9 | Seitliche Abdichtung/Lateral seal | P.T.F.E. | ||
10 | Ring Abdichtung/Ring seal | P.T.F.E. | ||
11 | Untere Abdichtung/Lower seal | P.T.F.E. | ||
12 | Ring/Brass ring | Messing | ||
13 | Kugel verchromt/Chromium-plated brass ball | Messing | ||
14 | Gehäuse/Housing | Messing |
Actuator features
Rotation angle: 90°.
Temperature: from 0°C to +80°C; from -20°C to +80°C with dry air only.
Air supply: 5,6 bar; maximum working supply 8,4 bar.
Operating media: dry filtered air, not necessary lubricated. In case of lubricated air, either non detergent oil or NBR-compatible oil must be used.
Valve features
Flanges: as per NI 2223 e 2229 PN 16
Working temperature: from -20°C to +150°C.
Working pressure: 16 bar for all dimensions
Fluid range: water, air, gas, petrolierous and petrochemical products. Not suitable for agressive media.